Engine Mount: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING .
Remove degas bottle. REFER to DEGAS BOTTLE .
Remove the 3 twist-type retainers and remove the air duct from the subframe.
NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan

Position a floor jack with a block of wood under the front of the oil pan to support the engine.
Remove the 4 engine mount nuts, the 3 engine mount bolts and the engine mount.