LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine Mechanical -3.5L Ti-VCT) >> Removal And Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all sealing surfaces with Motorcraft® Metal Surface Prep.
  2. NOTE: Apply clean Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) to the crankshaft front seal bore in the engine front cover.

    Using 303-1251 and 303-102 T74P-6316-B, install a new crankshaft front seal.

    G08028949
  3. NOTE: Do not use grease on seal or pulley hub as this may result in premature seal failure.
    NOTE: Apply clean Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) to the crankshaft front seal contact surface.

    Install the crankshaft pulley. Refer to CRANKSHAFT PULLEY .

scientia non olet · About LEMON Manuals