LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Engine Mechanical -2.0L GTDI) >> Removal And Installation >> Valve Seals >> Installation

Valve Seals: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Lubricate the valve seal with clean engine oil prior to installing.

    Using 303-470 T94P-6510-CH, install the valve seal.

    G08028648
  2. Install the valve spring. Refer to VALVE SPRINGS .
scientia non olet · About LEMON Manuals