Oil Cooler: Removal
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING
- Disconnect the battery ground cable. REFER to BATTERY DISCONNECT .
- Loosen the 4 retainers and remove the underbody shield.
- Using hose clamp pliers, clamp off the 2 oil cooler coolant hoses.
-
NOTE: If metal or aluminum material is present in the oil cooler, mechanical concerns exist. Failure to correct these concerns may cause engine failure. To diagnose mechanical concerns, REFER to ENGINE .
Loosen the 2 clamps and disconnect the 2 coolant hoses.