LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Engine Mechanical -2.0L GTDI) >> Removal And Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Remove the through-bolt from 303-096 T74P-6150-A.
    NOTE: Lubricate the oil seal with clean engine oil.

    Using 303-096 T74P-6150-A, install the crankshaft front oil seal.

    G09085017
  2. Install the crankshaft pulley. Refer to CRANKSHAFT PULLEY - EARLY BUILD  or CRANKSHAFT PULLEY - LATE BUILD .
scientia non olet · About LEMON Manuals