LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Mechanical - 6.2L) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal

Oil Level Indicator and Tube: Removal

WARNING: This page is about a different car, the 2013 Ford F-350 Super Duty and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH engine support insulator-to-cylinder block bracket. For additional information, refer to ENGINE SUPPORT INSULATORS .
  2. Remove the RH exhaust manifold. For additional information, refer to EXHAUST MANIFOLD - RH .
  3. Remove the oil level indicator.
  4. Remove the bolt and the oil level indicator tube.
    • Discard the O-ring seal.
scientia non olet · About LEMON Manuals