Section 214 (Engine Mechanical - 3.5L GTDI): Installation: Camshaft: Notes
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) DESCRIPTION
| Alignment Pins 307-399 |
|
| Handle 205-153 (T80T-4000-W) |
|
| Installer, Crankshaft Vibration Damper 303-102 (T74P-6316-B) |
|
| Installer, Front Cover Oil Seal 303-335 |
|
| Installer, Front Crankshaft Seal 303-1251 |
|
| Installer, VCT Spark Plug Tube Seal 303-1247 /2 |
|
| Powertrain Lift 300-OTC1585AE or equivalent |
|
| Tool, Camshaft Holding 303-1248 |
GENERAL EQUIPMENT
| Feeler Gauge |
| Hose Clamp Remover/Installer |
| Lock Pin |
| Strap Wrench |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® High Performance Engine RTV Silicone TA-357 |
WSE-M4G323-A6 |
| Motorcraft® Metal Surface Prep ZC-31-A |
- |
| Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-30 Super Premium Motor Oil (Canada) XO-5W30-QSP (US); CXO-5W30-LSP12 (Canada) |
WSS-M2C946-A |
| Motorcraft® Silicone Gasket Remover ZC-30 |
- |
| Motorcraft® Thread Sealant with PTFE TA-24 |
WSK-M2G350-A2 |