LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Mechanical - 3.7L Ti-VCT) >> Removal And Installation >> Engine Mount >> Removal

Engine Mount: Removal

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING .
  2. Remove the 3 twist-type retainers and the air duct.
    G07430766
  3. NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan

    Position a floor jack with a block of wood under the front of the oil pan to support the engine.

    G08029546
  4. Remove the 4 nuts, the 3 bolts and the engine mount.
    G08029547
scientia non olet · About LEMON Manuals