LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Mechanical - 3.7L Ti-VCT) >> Removal And Installation >> Engine Mount >> Installation

Engine Mount: Installation

WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the engine mount onto the engine studs and install the 4 nuts hand tight.
    • Install the 3 bolts and tighten to 90 Nm (66 lb-ft).
    • Tighten the 4 nuts to 63 Nm (46 lb-ft).
      G08029547
  2. Install the air duct and the 3 twist-type retainers.
    G07430766
scientia non olet · About LEMON Manuals