Component testing procedure
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Lock/unlock circuit | 8 and 6 | Rest | Open circuit |
| Lock | Open circuit | ||
| Unlock | Closed circuit | ||
| 7 and 6 | Rest | Open circuit | |
| Lock | Closed circuit | ||
| Unlock | Open circuit | ||
| Memory circuit | 5 and 6 | Rest | Open circuit |
| Set 1 | Closed circuit | ||
| 4 and 6 | Rest | Closed circuit | |
| Set 2 | Closed circuit | ||
| 3 and 6 | Rest | Open circuit | |
| Set 3 | Closed circuit |