Component testing procedure
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
| Circuit to test |
Connect self-powered test light or ohmmeter to terminals |
Move switch to these positions |
A good switch will indicate |
| Lock/unlock circuit |
3 and 2 |
Rest |
Open circuit |
| Lock |
Open circuit |
| Unlock |
Closed circuit |
| 1 and 2 |
Rest |
Open circuit |
| Lock |
Closed circuit |
| Unlock |
Open circuit |