Perimeter Alarm Arming
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
The system can be armed using any of the following methods:
- Press the door lock control switch to the lock position with the accompanying door open, then close it (then wait 20 seconds for the pre-arm phase to expire)
- Press the LOCK button on the RKE transmitter (then wait 20 seconds for the pre-arm phase to expire)
- Turn the key in the door lock cylinder to the lock position (then wait 20 seconds for the pre-arm phase to expire). This is the only way to arm the perimeter alarm system without also arming the inclination/intrusion feature