LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Convertible Top) >> Removal And Installation >> Convertible Top Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the overhead console.
    • Disconnect the overhead console electrical connector.
  2. Disconnect the convertible top switch electrical connector.
  3. Release the locking tabs, and remove the convertible top switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals