LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Convertible Top) >> Removal And Installation >> Convertible Top Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Make sure to hand-start the screws for the convertible top latches to avoid damaging the convertible top frame.
  1. Release the convertible top latches.
  2. Partially open the convertible top.
  3. Remove the caps and the 2 convertible top latch screws.
    • To install, tighten to 6 Nm (53 lb-in).
  4. Remove the convertible top latch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals