LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Convertible Top) >> Removal And Installation >> Convertible Top Ajar Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the RH rear window inner belt moulding.
  3. Remove the screw and the convertible top ajar switch.
    • To install, tighten to 9 Nm (80 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals