LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Windows And Glass - Glass, Frames And Mechanisms) >> Removal And Installation >> Window Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Use a shop towel or similar material between the tool and the door trim panel or damage to the door trim panel may occur.

    Release the clip and remove the door panel switch plate.

    • Disconnect the electrical connector.
  2. Release the tabs and remove the window control switch.
  3. To install, reverse the removal procedure.