LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Body Panel System - Front End Body Panels) >> Removal And Installation >> Fender Splash Shield >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fender splash shield screw.
  2. Remove the 7 fender splash shield pin-type retainers.
  3. Remove the front and rear fender splash shields.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals