Oil Cooler - Engine Mounted: Removal
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
- Drain the engine cooling system. Refer to ENGINE COOLING .
- Remove the generator. Refer to CHARGING SYSTEM .
-
NOTE: If metal or aluminum material is present in the oil cooler, mechanical concerns exist. Failure to correct these concerns may cause engine failure. To diagnose mechanical concerns, refer to ENGINE SYSTEM - GENERAL INFORMATION .
Remove the 6 bolts and the oil cooler.
- Discard the gaskets.
- Inspect the oil cooler.