LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Safety Belt System) >> General Procedures >> Safety Belt Twisted at the Safety Belt Guide

Safety Belt Twisted at the Safety Belt Guide

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Typical D-ring shown, others similar.
  1. Grasp the belt webbing at the shoulder belt guide (D-ring).
  2. Rotate and fold the belt webbing over itself to remove the twist.
  3. Feed the folded portion of the belt through the safety belt guide (D-ring).
    Fig 1: Feeding Folded Portion Of Belt Through Safety Belt Guide (D-Ring)
    G06071313Courtesy of FORD MOTOR CO.