Principles of Operation: Belt-Minder®
The Belt-Minder® feature is a supplemental warning to the safety belt warning function. This feature provides additional reminders to the driver that the driver safety belt is unbuckled by intermittently sounding a chime and illuminating the safety belt warning indicator in the Instrument Cluster (IC). The Belt-Minder® feature will time out after approximately 5 minutes.
When a MyKey™ is in the ignition, deactivation of Belt-Minder® will be ignored. The Belt-Minder® feature can be activated or deactivated by the administrator key. Using A MyKey™ (non-administrator key) will override the 5 minute Belt-Minder® timer and the deactivation of the Belt-Minder® feature. Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) or the Owner's Literature for further information on MyKey™ functionality.
To activate or deactivate the Belt-Minder® feature, refer to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
| If.. | Then.. |
|---|---|
| the driver safety belt is not buckled before the vehicle has reached at least 5 km/h (3 mph) and 1-2 minutes have elapsed since the ignition switch has been turned to ON.. | the Belt-Minder® feature is activated - the safety belt warning light illuminates and the warning chime sounds for 6 seconds every 30 seconds, repeating for approximately 5 minutes or until the safety belt is buckled. |
| the driver safety belt is buckled while the safety belt indicator is illuminated and the safety belt warning chime is sounding... | the Belt-Minder® feature will not activate. |
| the driver safety belt is buckled before the ignition switch is turned to the ON position... | the Belt-Minder® feature will not activate. |