Cylinder Head: Notes
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Alignment Pins, Cylinder Head 303-1040 (SR-015486) |
|
| Handle 205-153 (T80T-4000-W) |
|
| Holding Tool, Crankshaft 303-448 (T93P-6303-A) |
|
| Installer, Differential Bearing Cone 205-142 (T80T-4000-J) |
|
| Installer, Front Cover Oil Seal 303-335 (T88T-6701-A2 plate only) |
|
| Installer, Front Crank Seal and Damper 303-1531 |
|
| Installer, Spark Plug Tube Seal 303-1247/2 |
|
| Strap Wrench 303-D055 (D85L-6000-A) or equivalent |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada) |
WSS-M2C945-A |
| Motorcraft® SAE 5W-50 Full Synthetic Motor Oil XO-5W50-QGT |
WSS-M2C931-B |
| Motorcraft® Silicone Gasket Remover ZC-30 |
- |
| Motorcraft® Orange Antifreeze/Coolant Concentrated VC-3-B (US); CVC-3-B2 (Canada) |
WSS-M97B44-D |
| Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A |
| Motorcraft® Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |