LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Engine Mechanical - 5.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Assembly

Cylinder Head: Assembly

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Apply clean engine oil to the valve seals and the inside diameter of the valve guides prior to assembling the cylinder head components.
  1. NOTE: The valve seal must be bottomed out on the cylinder head spring seat.

    Install the valve seal.

  2. Install the valve into the cylinder head.
  3. Using the Valve Spring Compressors, install the spring, retainer and keys.
    G07961037
  4. Repeat the previous steps for each of the remaining valves.
scientia non olet · About LEMON Manuals