Dual mass flywheel
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The dual mass flywheel normally has up to a total of 14 degrees (6.5 ring gear teeth) maximum rotational freeplay between the primary (bolted to crankshaft) and the secondary mass (clutch disc face).
| Item | Part Number | Description |
|---|---|---|
| 1 | 6379 | Dual mass flywheel bolt (8 required) |
| 2 | 6375 | Dual mass flywheel |
| 3 | 12A227 | Crankshaft sensor ring |
| 4 | 6701 | Crankshaft rear seal |
- Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.