LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Clutch) >> Removal And Installation >> Pilot Bearing >> Removal

Pilot Bearing: Removal

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clutch disc and the clutch pressure plate. Refer to CLUTCH DISC AND PRESSURE PLATE - 3.7L , CLUTCH DISC AND PRESSURE PLATE - 5.0L  or CLUTCH DISC AND PRESSURE PLATE - 5.8L .
  2. Using the Pilot Bearing Remover, remove the pilot bearing.
    Fig 1: Identifying Pilot Bearing Remover
    G06382480Courtesy of FORD MOTOR CO.