Section 172 (Engine Ignition System - 5.0L (4V)): Specifications
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A |
ESE-M1C171-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Base ignition timing | 10 degrees Before Top Dead Center (BTDC) non-adjustable |
| Firing order | 1-5-4-8-6-3-7-2 |
| Spark plug gap | 1.25 - 1.35 mm (0.049 - 0.053 in) |
| Spark plug type | 12405 |
TORQUE SPECIFICATIONS
| Description | Nm | lb-in |
|---|---|---|
| Ignition coil-on-plug bolts | 6 | 53 |
| Spark plugs | 14 | 124 |