LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Interior Trim And Ornamentation) >> Removal And Installation >> Scuff Plate Trim Panel

Scuff Plate Trim Panel

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Scuff Plate Trim Panel With Retaining Clips And Electrical Connector
G06384732Courtesy of FORD MOTOR CO.
Item Part Number Description
1 6313209 LH/6313209 RH Scuff plate trim panel
2 - Scuff plate trim panel retaining clips (4 required) (part of 6313209 LH/6313209 RH)
3 14A005 Scuff plate trim panel electrical connector
  1. NOTE: To avoid damage to the scuff plate trim panel, remove any retaining clips from the body and attach them to the scuff plate trim panel before installing.

    Remove the front door scuff plate trim panel by lifting straight up on the front and rear edge of the scuff plate trim panel to release the 4 lower retaining clips.

  2. Disconnect the door scuff plate trim panel electrical connector.
  3. Remove the door scuff plate trim panel.
  4. To install, reverse the removal procedure.