DTC Charts
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This module utilizes a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
BODY CONTROL MODULE B (BCM-B) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1219:11 | Interior Boot/Trunk Release Switch: Circuit Short To Ground | GO to PINPOINT TEST F . |
| B1284:12 | Trunk/Boot Open Activation Request Hardwire: Circuit Short To Battery | GO to PINPOINT TEST F . |
| B1284:14 | Trunk/Boot Open Activation Request Hardwire: Circuit Short To Ground or Open | GO to PINPOINT TEST F . |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES . |
NOTE:
This module utilizes a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
INSTRUMENT PANEL CLUSTER (IPC) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1218:44 | Transmitter Identification Code: Data Memory Failure | The Smart Junction Box (SJB) limit of 4 integrated keys is reached. PROGRAM a maximum of 4 integrated keys. REFER to INTEGRATED KEYHEAD TRANSMITTER (IKT) KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . CLEAR the DTCs. REPEAT the self-test. |
| B1218:51 | Transmitter Identification Code: Not Programmed | GO to PINPOINT TEST H . |
| B1218:81 | Transmitter Identification Code: Invalid Serial Data Received | GO to PINPOINT TEST G . |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES . |
SMART JUNCTION BOX (SJB) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B1138 | Memory Full | The Smart Junction Box (SJB) limit of 4 integrated keys is reached. PROGRAM a maximum of 4 integrated keys. REFER to INTEGRATED KEYHEAD TRANSMITTER (IKT) KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT . CLEAR the DTCs. REPEAT the self-test. |
| B1139 | Invalid Transmitter Identification Code | GO to PINPOINT TEST G . |
| B2276 | Less Than 2 Transmitters Programmed | PROGRAM all of the customer's Integrated Keyhead Transmitters (IKTs) (minimum of 2). REFER to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) . TEST the system for normal operation. |
| B2425 | Remote Keyless Entry Out of Synchronization | GO to PINPOINT TEST G . |
| B2667 | Liftglass Release Switch Circuit Failure | GO to PINPOINT TEST F . |
| B2A25 | Trim Panel Lock Switch Circuit Failure | GO to PINPOINT TEST E . |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES . |