LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Instrument Cluster Illumination And Panel Illumination) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column opening trim panel. For additional information, refer to INSTRUMENT PANEL - EXPLODED VIEW .
  2. Remove the switch bezel screw.
  3. Remove the switch bezel assembly.
  4. Disconnect the electrical connectors
  5. Release the tabs and remove the instrument panel dimmer switch from the switch bezel.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals