DTC Charts
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
SMART JUNCTION BOX (SJB) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | The module has temporarily disabled an output because an excessive current draw exists (such as short to ground). The cause of the excessive current draw MUST be corrected before the SJB will enable the output. After the cause of the concern is corrected, CLEAR the DTCs. REPEAT the self-test. |
| B106F | Module Disabled Due to External Fault | The module has permanently disabled an output because an excessive current draw exists (such as a short to ground) that has exceeded the limits of what the SJB can withstand. The cause of the excessive current draw MUST be corrected before a new SJB is installed. ADDRESS all other DTCs first . After the cause of the concern is corrected, INSTALL a new SJB. REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation. |
| B2212 | Panel Dim Switch Out of Range | GO to PINPOINT TEST B . |
| B2A32 | LED Backlighting Output Circuit Open | If the backlighting components are inoperative, GO to PINPOINT TEST C . If the backlighting components are always on, GO to PINPOINT TEST D . |
| B2A33 | LED Backlighting Output Circuit Short to Ground | GO to PINPOINT TEST C . |
| All other DTCs | - | REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES . |