Cutting Tool Symbols

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The cutting tool symbols are used to show which type of cutting tool is recommended to carry out a procedure step.

Fig 1: Cutting Tool Symbols Chart

Courtesy of FORD MOTOR CO.

Item	Description
1	Cutting knife
2	Air body saw
3	Scissors
4	Grinder
5	Jig saw
6	Plasma cutter
7	Sanding Paper
8	Wire brush