LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Manual Transmission & Clutch - General Information) >> Diagnosis And Testing >> Manual Transmission and Clutch >> Inspection and Verification >> Check Fluid Level and Condition

Check Fluid Level and Condition

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The vehicle should not be driven if the transmission fluid level is low or damage may occur.
NOTE: Excessive temperatures may break down the transmission lubricant. If there is reason to believe the transmission has been subjected to temperatures exceeding 135°C (275°F) for an extended period (greater than 20 minutes), change the lubricant immediately.

An incorrect transmission fluid level may affect the transmission operation and can result in transmission damage. For transmission draining and filling, refer to MANUAL TRANSAXLE/TRANSMISSION - MT82 GETRAG 6-SPEED or MANUAL TRANSAXLE/TRANSMISSION - TR6060 .

A low transmission fluid level can result in poor transmission shifting, engagement or damage. It also indicates a leak in the transmission seals or gaskets.

  1. Check the transmission fluid condition.
    • Observe the color and the odor of the fluid. Allow the transmission fluid to drip onto a white cloth and examine the stain. Check the transmission fluid for contamination or metal particles.
      • Transmission fluid should appear reddish in color for the TR6060.
      • Transmission fluid should appear amber to dark amber in color for the MT82.