Differential Cooler Lines - Center: Removal
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
-
- To install, tighten the nuts to 25 Nm (18 lb-ft).
-
- Special Tool(s): Transmission Cooler Line Disconnect Tool 307-569.
-
- To install, tighten the bolt to 58 Nm (43 lb-ft).
-
- To install, tighten the bolts to 10 Nm (89 lb-in).