LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Battery, Battery Mounting & Battery Cables) >> Specifications

Section 149 (Battery, Battery Mounting & Battery Cables): Specifications

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification Fill Capacity
Threadlock and Sealer
TA-25
WSK-M2G351-A5 -
GENERAL SPECIFICATIONS

Item Specification
Battery
Cold Cranking Amps (CCA) measured at -18°C (0°F) 590 CCA or 500 CCA (Boss® 302 only)
Voltage 12 volts
TORQUE SPECIFICATIONS

Description Nm lb-ft lb-in
Battery cable harness bracket bolt 15 - 133
Battery cable harness bracket nuts (5.0L, 5.8L) 9 - 80
Battery cable harness bracket-to-engine block nut (3.7L) 47 35 -
Battery cable harness-to-valve cover bracket nut (3.7L) 9 - 80
Battery cable terminal nut 10 - 89
Battery ground cable body terminal bolt 10 - 89
Battery ground cable-to-engine terminal nut (5.0L, 5.8L) 47 35 -
Battery ground cable-to-head terminal bolt (3.7L) 12 - 106
Battery hold-down clamp bolt 8 - 71
Battery Junction Box (BJB) terminal nut 10 - 89
Battery tray bolts 11 - 97
Generator B+ terminal nut 17 - 150
Lower battery cable harness bracket nut (5.8L) 8 - 71
Starter solenoid positive cable terminal nut 12 - 106
Starter solenoid wire terminal nut 5 - 44