LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Vehicle Dynamic Suspension) >> Description And Operation >> Vehicle Dynamic Suspension >> System Operation >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
VDM NETWORK INPUT MESSAGES

Broadcast Message Originating Module Message Purpose
Damper Mode Change Request IPC Communicates the driver selected suspension mode (Sport or Normal). The suspension remains in the requested mode, including key-off and key-on cycles, unless an override condition or fault exists.
ESC Damper State Request ABS Module Requests a specific suspension state from the VDM, which causes the state of the suspension to deviate from the driver selected mode.
Vehicle speed PCM Communicates vehicle speed in kilometers per hour. This signal is used by the VDM for certain override conditions.
scientia non olet · About LEMON Manuals