Exterior Lighting: Headlamps
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
The headlamps are controlled by the SJB. The headlamp and multifunction switches are constantly monitored by the SJB. The SJB processes information (such as low beam, high beam or flash-to-pass requests) from the switch inputs, and then outputs voltage to the headlamps accordingly. In the event the SJB detects a fault with any of the headlamp switch inputs, all the exterior lamps are illuminated. There is also a headlamp battery saver feature. This feature turns off the headlamps 10 minutes after the ignition switch is turned off.