Seat Cushion - Passenger
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Production Occupant Classification System (OCS) system is shown in illustration. For OCS system service kit, refer to OCCUPANT CLASSIFICATION SENSOR
.
NOTE:
Manual seat shown in illustration, power similar.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Pin-type retainer [part of production Occupant Classification System (OCS) system] |
| 2 | - | OCS bladder (part of 632A22) |
| 3 | W520113 | Seat track nuts |
| 4 | 62900 | Cushion trim cover |
| 5 | - | Cushion heater mat (if equipped) |
| 6 | - | Cushion foam pad (part of 632A22) |
| 7 | 63100 | Cushion frame |
| 8 | 14A576 | Wire harness |
| 9 | 61704 | Seat track |
| 10 | W520113 | Bracket nut (2 required) |
| 11 | 61202 | Safety belt buckle |
| 12 | 14B416 | Seat position sensor |
| 13 | W505256 | Seat position sensor bolt |
| 14 | - | Safety belt buckle bracket |
| 15 | - | Safety belt buckle bolt (part of 61202) |
- For additional information, refer to the appropriate procedures.