LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and hub assembly. For additional information, refer to WHEEL BEARING AND WHEEL HUB .
  2. Using a press, remove the wheel stud from the wheel bearing and hub assembly.
    Fig 1: Removing Wheel Stud
    G06269389Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals