LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Engine System - General Information) >> General Procedures >> Camshaft Surface Inspection

Camshaft Surface Inspection

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
    Fig 1: Locating Camshaft Inspection Areas
    G06064055Courtesy of FORD MOTOR CO.