Disassembly and Assembly

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Input Shaft And Bearing

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	7025	Input shaft bearing
2	7017	Input shaft
3	7025	Cylindrical roller bearing
4	7025	Axial thrust bearing
5	7025	Axial thrust washer

NOTE: Any wear or damage on the input shaft can prevent the clutch from operating correctly.

Inspect the splines on the input shaft for wear or damage. If worn or damaged, install a new input shaft.
- Use an emery cloth to remove small scratches.
  
  Fig 2: Locating Input Shaft Splines
  Courtesy of FORD MOTOR CO.
Using the Bearing Puller and a press, remove the input shaft front bearing.

Fig 3: Input Shaft Front Bearing Puller
Courtesy of FORD MOTOR CO.
Using the Bearing Puller and a press, install a new input shaft bearing.

Fig 4: Input Shaft Bearing Puller And Press
Courtesy of FORD MOTOR CO.