LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Automatic Transmission (6R80)) >> Diagnosis And Testing >> Preliminary Inspection >> Check Transmission Fluid Level and Condition >> Transmission Fluid Condition Check

Transmission Fluid Condition Check

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the transmission fluid level.
  2. Remove the transmission fluid fill plug and transmission fluid level indicator allowing the transmission fluid to drip onto a facial tissue and examine the stain.
  3. Observe the color and the odor.
  4. If evidence of solid material is found, remove the transmission fluid pan for further inspection.
  5. If the stain is a foamy pink color, this may indicate coolant in the transmission. Inspect the engine cooling system at this time.
  6. If transmission fluid contamination or transmission failure is confirmed by the sediment in the bottom of the transmission fluid pan, disassemble and completely clean the transmission. This includes the torque converter and transmission fluid cooler tubes. Install a new auxiliary transmission fluid cooler.
scientia non olet · About LEMON Manuals