Planetary Gearset Operation
WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Front planetary gearset driving components:
- Ring gear (input shaft)
Front planetary gearset driven components:
- Planetary carrier
Front planetary gearset held components:
- Sun gear (splined to pump assembly)
Rear planetary gearset driving components:
- No. 3 sun gear
Rear planetary gearset driven components:
- Ring gear (output shaft)
Rear planetary gearset held components:
- Planetary carrier
1ST GEAR CLUTCH APPLICATION CHART
| Gear | Forward A (1, 2, 3, 4) | Direct B (3, 5, R) | Inter-mediate C (2, 6) | Low/Reverse D (1, R) | Overdrive E (4, 5, 6) | Low-OWC | ||
|---|---|---|---|---|---|---|---|---|
| 1st Gear D | D | H (1) | H | |||||
| 1st Gear Manual | D | H | H | |||||
| Planetary Components | Front planetary carrier-to-No. 3 sun gear | Front carrier-to-No. 2 sun gear | No. 2 sun gear | Rear planetary carrier | Input shaft-to-rear planetary carrier | Rear planetary carrier | ||
D = Drive Clutch H = Hold Clutch O/R = Overrunning |
||||||||
For component information, refer to MECHANICAL COMPONENTS AND FUNCTIONS .