DTC P225A: NOX Sensor Calibration Memory (Bank 1 Sensor 1)
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC P225A: NOX SENSOR CALIBRATION MEMORY (BANK 1 SENSOR 1)
| Description: | This DTC sets when the PCM receives an incorrect calibration message from the nitrogen oxides bank 1, sensor 1 (NOx11) module. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the NOx11 module is at the latest calibration level. The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RD . | ||