DTC P0544: Exhaust Gas Temperature Sensor Circuit: Bank 1 Sensor 1
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0544: EXHAUST GAS TEMPERATURE SENSOR CIRCUIT: BANK 1 SENSOR 1
| Description: | The PCM monitors the operation of the exhaust gas temperature bank 1, sensor 1 (EGT11) sensor to determine if the EGT11 sensor responds to the increase in temperature of the exhaust gas during vehicle operation. The PCM then compares the measured temperature to a modeled value. This DTC sets when, after 5 minutes of driving, following a 6 hour soak, the EGT11 sensor temperature does not correlate to the modeled temperature of 170°C (338°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the EGT11 PID between ignition ON, engine OFF and ignition ON, engine running for an indication of a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||