DTC P0269: Cylinder 3 Contribution/Balance
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0269: CYLINDER 3 CONTRIBUTION/BALANCE
| Description: | The PCM monitors the crankshaft speed and acceleration for each cylinder event. This DTC sets when the acceleration rate of the crankshaft is greater than or less than the calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Carry out the power balance test to verify cylinders contribution. Disregard any DTCs set as a result of the power balance test. Single or inconsistent non-contributing power cylinder traces may be caused by a natural variation in a crankshaft speed and should be ignored. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST M . | ||