LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Powertrain DTC Charts & Descriptions (Diesel)) >> Diagnostic Trouble Code (DTC) Charts And Descriptions >> DTC P0263: Cylinder 1 Contribution/Balance

DTC P0263: Cylinder 1 Contribution/Balance

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0263: CYLINDER 1 CONTRIBUTION/BALANCE

Description:  The PCM monitors the crankshaft speed and acceleration for each cylinder event. This DTC sets when the acceleration rate of the crankshaft is greater than or less than the calibrated value.
Possible Causes: 
  • Base engine concerns
  • Damaged valve train assembly
  • Damaged fuel injector
Diagnostic Aids:  Carry out the power balance test to verify cylinders contribution. Disregard any DTCs set as a result of the power balance test. Single or inconsistent non-contributing power cylinder traces may be caused by a natural variation in a crankshaft speed and should be ignored.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST M .
scientia non olet · About LEMON Manuals