Roof Opening Panel Weatherstrip: Installation
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Place a new weatherstrip into position on the glass assembly, with the splice (seam) on the passenger side.
- Starting with the corners, push the weatherstrip into position. Continue pushing the weatherstrip into position around the glass assembly until complete. Use a plastic or rubber hammer if necessary.
- Install the roof opening panel. For additional information, refer to ROOF OPENING PANEL GLASS .
- Align the roof panel. For additional information, refer to ROOF OPENING PANEL ALIGNMENT .
- Initialize the roof opening panel motor. For additional information, refer to ROOF OPENING PANEL MOTOR INITIALIZATION .