Rear Video
The rear video camera system visually aids the driver when reversing or reverse parking the vehicle. The rear video camera is controlled by the BCM via a LIN circuit. The system consists of the following:
- Rear video camera
- Interior auto-dimming rear view mirror (vehicles not equipped with a 203.2 mm (8 in) touchscreen)
- APIM (vehicles equipped with a 203.2 mm (8 in) touchscreen)
- FDIM (vehicles equipped with a 203.2 mm (8 in) touchscreen)
- BCM
On vehicles not equipped with a 203.2 mm (8 in) touchscreen, when the transmission is in REVERSE (R), the image from the rear video camera is displayed in the left portion of the interior auto-dimming rear view mirror. When the system is active, the video output signal is sent from the rear video camera directly to the display that is integrated into the interior auto-dimming rear view mirror.
On vehicles equipped with a 203.2 mm (8 in) touchscreen, when the transmission is in REVERSE (R), the image from the rear video camera is displayed on the FDIM. When the system is active, the video output signal is sent from the rear video camera to the APIM. The APIM then outputs the video signal to the FDIM.