LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Anti-Theft System - Passive Anti-Theft System) >> Diagnosis And Testing >> Anti-Theft >> Principles of Operation >> Passive Anti-Theft System (PATS) PIDs

Passive Anti-Theft System (PATS) PIDs

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The Passive Anti-Theft System (PATS) PIDs are a useful tool when diagnosing a PATS concerns. They can also be used to determine if unlimited key mode or customer spare key programming are enabled/disabled.

BCMPATS PID PID Description PID reading required for PATS to be enabled
PROGRMD_KEY Determines if the key in the ignition lock cylinder is a programmed key. Present
MIN_KEYS_RQD Minimum number of programmed keys required. This PID always reads 2. -
KEYS_PROGMD Number of keys currently programmed into the Body Control Module (BCM) (If unlimited key mode is enabled, this PID will only read 2 regardless of how many keys are programmed). 2 to 8
START_ENABLD Indicates if PATS will allow the engine to start. Enabled
PCM_ID Indicates if there is a PCM ID currently stored into the BCM. Stored
PCM_VERIFY Indicates if the PCM ID received by the BCM matches the PCM ID stored in the BCM memory. Yes
UNL_KEY_ID Displays the unlimited key code 8 digit keycode (this PID is not available when unlimited key mode is enabled). -
UNL_KEY_MODE Indicates if unlimited key mode is enabled/disabled. -