LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Fuel Charging System & Fuel Control System - 6.2L) >> Removal And Installation >> Throttle Body >> Removal

Throttle Body: Removal

WARNING: This page is about a different car, the 2013 Ford F-350 Super Duty and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  2. Disconnect the heater coolant hose retainer from the ACL outlet pipe-to-Throttle Body (TB) adapter.
  3. Disconnect the crankcase ventilation tube quick connect fitting from ACL outlet pipe-to-TB adapter. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION - GASOLINE AND DIESEL .
  4. Disconnect the brake booster vacuum hose from the ACL outlet pipe-to-TB adapter.
  5. Remove the 2 bolts and the ACL outlet pipe-to-TB adapter.
  6. Loosen the clamp and disconnect the TB adapter from the TB.
  7. Disconnect the Electronic Throttle Control (ETC) electrical connector.
  8. Remove the 4 bolts and the TB assembly.
    • Discard the TB O-ring seal.
scientia non olet · About LEMON Manuals