DTC P2109: Throttle/Pedal Position Sensor A Minimum Stop Performance
P2109 - THROTTLE/PEDAL POSITION SENSOR A MINIMUM STOP PERFORMANCE
| Description: The PCM monitors the electronic throttle for the ability of the throttle plate to reach the lower mechanical stop position within a calibrated amount of time at ignition ON. This DTC sets when the throttle plate does not reach the lower mechanical stop position within a calibrated amount of time. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Visually inspect the throttle plate for an obstruction. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DV . | ||